Table of Contents
Advertisement
www.indesit.com
Fitting - Step 2
Once engaged at the top, then push the bottom rods into the lower slots in the oven side walls. Now allow
the shelf supports to lower slightly and engage. See Fig. 3.
This process should be repeated and all 4 shelf supports fitted in the top and main ovens.
Fitting - Step 3
The shelves can now be fitted into the shelf supports at the required heights. Note that there is pan guard
'D' that should be at the back of the oven as shown. See Fig. 4.
Your ovens are now ready to use !
24
Fig. 3
Fig. 4
D
03/2023 - W11640625
XEROX FABRIANO
Advertisement
Table of Contents
