Fujitsu AOUG12LZAH1 Service Manual page 91

Check point 9-1. Check function setting
Change setting of function 48 (Room temperature sensor switching) to 01.
NOTE: For details of function setting number 48, refer to
WORKING on page 05-1.
Check point 9-2. Check the effects of function setting change
Did this function setting improve temperature control?
→ If the space is still too cool, go to
Check point 12. Check function setting
Using the table on the right adjust temperature correction by changing function setting 35. (Room
Temperature control for wired remote controller sensor)
NOTE: For details of function setting number 35, refer to
WORKING on page 05-1.
3-8. Too cool
"Function settings "
↓
"Check point 10".
↓
End
"Function settings "
↓
End
- (03-55) -
in Chapter 5. FIELD
in Chapter 5. FIELD
3. Troubleshooting without error code