Table of Contents
Advertisement
Before using for the first time
en
KBefore using for the first
time
B efore you can use your new appliance, you must
B e f o r e u s i n g f o r t h e f i r s t t i m e
make some settings. You must also clean the cooking
compartment and accessories.
Before using for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water.
To ensure that the appliance can reliably remind you to
descale it when required, you must set your water
hardness range correctly.
Caution!
The appliance may become damaged due to the
■
use of unsuitable liquids.
Do not use distilled water, highly chlorinated tap
water (>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
Malfunctions may occur when using filtered or
■
demineralised water.
The appliance may request that you top up the water
tank even though it may be full, or operation with
steam is cancelled after approx. two minutes.
If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ratio
of one to one.
Notes
If your water is very hard, we recommend that you
■
use softened water.
If you only use softened water, you can set the water
■
hardness range to "softened".
If you use mineral water, set the water hardness
■
range to "4 very hard".
If you use mineral water, you must only use non-
■
carbonated mineral water.
Water hardness range
0
1 (up to 1.3 mmol/l)
2 (1.3 - 2.5 mmol/l)
3 (2.5 - 3.8 mmol/l)
4 (above 3.8 mmol/l)
Initial use
As soon as the appliance is connected to the power
supply, the first setting "Language" appears on the
display.
Setting the language
Touch the bottom line.
1.
Swipe to the left or right to select the required
2.
language.
Touch the top line.
3.
14
Setting
0 softened
1 soft
2 medium
3 hard
4 very hard
Setting the time
Touch "Clock".
1.
Touch the bottom line.
2.
Swipe to the left or right to select the current hour.
3.
Touch "Minutes".
4.
Swipe to the left or right to select the current minute.
5.
Touch the 8 symbol to apply the setting.
6.
Setting the date
Touch "Date".
1.
Touch the bottom line.
2.
Swipe to the left or right to select the current day.
3.
Touch "Month".
4.
Swipe to the left or right to select the current month.
5.
Touch "Year".
6.
Swipe to the left or right to select the current year.
7.
Touch the 8 symbol to apply the setting.
8.
Setting the water hardness
Touch "Water hardness".
1.
Touch the bottom line.
2.
Swipe to the left or right to select the appropriate
3.
water hardness.
Touch the 8 symbol to complete the initial use.
4.
The initial use is complete.
Notes
You can change these settings at any time in the
■
basic settings. ~ "Basic settings" on page 23
After connecting the appliance to the power or
■
following a power cut, the settings for initial use are
shown in the display.
Opening and closing the appliance door
Opening the appliance door
Note: The door handle will close on its own when you
let it go.
Press the top of the door handle until it opens
1.
(fig.
).
!
Pull the door handle towards you until the appliance
2.
door opens (fig.
).
"
Advertisement
Table of Contents
