Intex 126384GN Owner's Manual page 10

POOL SETUP ( continued )
• Use a large mason rule (aluminum or wood)
and a level. Level out the ground by cutting
rectangles (or squares), locating this rule in
the selected and cleaned area
(see drawing 2.2).
A
4. Finishing
• On the cleaned and leveled ground, spread a light coat of sieved dirt to a maximum depth of 1/2 inch
(1 cm). Spray water and compact it (with a garden roller). Double check and ensure it is well leveled.
The ground has to be perfectly level in order to proceed further.
5. Patio block installation
• Purchase 13 pieces of patio block for 13'8" pool or 15 pieces of patio block for 15'8" pool. The minimum
dimensions of each block should be 18" x 18" x 2". Mark the area where the blocks will be buried (see
drawing 3.1), then remove 2" (5.08 cm) of soil from the marked area (see drawing 3.2).
• For 13'8" (417 cm) pool, where
A = 7'3" (221 cm) = Radius of grass area need to be removed and leveled.
B = 3'5" (104.1 cm) = Distance between each Patio Block.
For 15'8" (478 cm) pool, where
A = 8'3" (251.5 cm) = Radius of grass area need to be removed and leveled.
B = 3'5" (104.1 cm) = Distance between each Patio Block.
B
A
• The top of blocks should be flush with soil surface and level with the area surface and with all patio
blocks around entire pool (see drawing 3.3).
SAVE THESE INSTRUCTIONS
(120IO) ENGLISH 7.5" X 10.3" PANTONE 295U 06/30/2020
3.1
English
120A
2.2
3.2
2" (5.08 cm)
3.3
Page 9