Setting Dab Station Order; Pruning Dab Stations; Adjusting System Settings - Renkforce BTS-101 Operating Instructions Manual

10.5 Setting DAB station order

Your radio has 3 station order settings from which you can choose.
Setting
Alphanumeric
Ensemble
Valid
1. Press and hold the Info/Menu button to enter DAB menu list.
2. Press the Tuning up/down button to select "Station order".
3. Press the Select button to confirm the selection.
4. Use the Tuning up/down button to select and enable a setting.
The current setting is indicated by an asterisk "*".
Æ

10.6 Pruning DAB stations

If you move to a different part of the country, some of the stations which were listed
may not be available. Also, some DAB services might stop broadcasting or might
change the location or frequency. These stations are shown in the station list with
a question mark "?". The prune function will delete the marked DAB stations from
your station list.
1. Press and hold the Info/Menu button to enter DAB menu list.
2. Press the Tuning up/down button to select "Prune".
3. Press the Select button to confirm the selection.
4. Press the Tuning up/down button to select "YES" (Prune) or "NO" (Cancel).
5. Press the Select button to confirm the selection.

10.7 Adjusting system settings

You can adjust the system settings to your needs. Settings include time/date, clock
format, display contrast, language, or factory reset.
1. Use the Tuning up/down button to enter the settings menu.
2. Use the Tuning up/down button to select "settings".
Description
Sorts the station list alpha-numerically (0... 9... A... Z).
Organizes the station list by DAB multiplex
Shows stations for which a signal can be found.
39