Table of Contents
Advertisement
4.
When return to the RAIDXpert2 Configuration Utility menu, select the Array Size and
other detailed policies, press <Enter>. Save changes when finish.
You can specify the array size to be created. Choosing the value 0 will set the maximum
supported array size when a valid configuration is selected.
Deleting a RAID set
Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1.
Select RAIDXpert2 Configuration Utility > Delete Array and press <Enter>. Select
the Array you want to delete and select Delete Array, press <Enter>.
2.
Select On to confirm your choice and then select Yes to delete the RAID Array and
return to the RAIDXpert2 Configuration Utility menu, or select No to cancel.
4.2
Creating a RAID driver disk
4.2.1
Creating a RAID driver disk in Windows
To install the RAID driver for Windows
1.
During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
2.
Insert the supported USB flash drive with RAID driver into the USB port, and then click
Browse.
3.
Click the name of the device you've inserted, go to Drivers > RAID, and then select
the RAID Bottom drivers first and click OK, then select the RAID driver for the
corresponding OS version, clik OK.
4.
Follow the succeeding screen instructions to complete the installation.
To set up a Windows
driver for your optical drive.
ROG STRIX X399-E GAMING
OS:
®
UEFI operating system under RAID mode, ensure to load the UEFI
®
®
4-3
Advertisement
Table of Contents
