Checking The Remaining Time Or The Recording Position - Sony MZ-R37 Operating Instructions Manual

3
While observing the level meter in
the display, adjust the recording level
by pressing + (+) or = (–).
Set the level so that it hits the 5th
indicator from the left (i.e., the length
of the lit recording level indicator
reaches the full length of the
recording level guide) at maximum
input level.
.
Recording level guide
Note
Adjust the recording level while the
recorder is in standby mode. You
cannot adjust it while recording.
4
Press P again to start recording.
To stop recording, press p.
The recording level control is switched back
to automatic control when you record the
next time.
14
REC19
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.
DISPLAY•EDIT•INSERT
1
Press DISPLAY while recording or in
stop mode. Each time you press the
button, the display changes as
follows.
B
While recording
A
Track number
Track number
In stop mode
A
Track number
Track name 1)
Disc name 1)
1)
Appears only if the track has been labeled.
z
If you want to check the playing position or
track name while playing, see page 16.
Bottom
001
A
B
Elapsed time
Remaining time for
recording
B
Elapsed time
Remaining time for
recording
Remaining time
after the current
location