Front Wheel - Yamaha TT-R50EL 2019 Owner's Manual

Periodic maintenance and adjustment

Front wheel

To remove the front wheel
1. Loosen the axle nut.
1
2
1. Axle nut
2. Washer
2. Place the motorcycle on a mainte-
nance stand. WARNING!
7
avoid injury, securely support
the vehicle so there is no danger
of it falling over.
3. Disconnect the brake cable at the
wheel by removing the brake lever
free play adjusting nut at the brake
camshaft lever, then remove the
cable from the brake camshaft le-
ver.
1
3
2
1. Brake cable
2. Brake camshaft lever
3. Brake lever free play adjusting nut
EAU24361
EAU56365
To
[EWA10752]
7-30
4. Remove the axle nut and washer.
5. Pull the wheel axle out, and then
remove the wheel.
1. Wheel axle
To install the front wheel
1. Lift the wheel up between the fork
legs.
2. Insert the wheel axle from the right
side.
TIP
Make sure that the slot in the brake
shoe plate fits over the retainer on the
fork leg.
2
1
1. Slot
2. Retainer
3. Install the washer and axle nut.
4. Take the motorcycle off the main-
tenance stand and put the side-
stand down.
5. Tighten the axle nut to the speci-
fied torque.
1