Troubleshooting - Kogan KAM52UMRDHA User Manual

TROUBLESHOOTING

Problem
Light on, but
motor does not work
Both light and
motor do not
work
Oil leakage
Vibration
Possible Cause
The blades are blocked.
The capacitor is damaged.
The motor is damaged.
The internal wiring of motor is cut
off/ disconnected. An unpleasant
smell may be produced.
Apart from the above mentioned, check the following:
Light damaged.
Power cord loose.
Outlet and the air ventilation
entrance are not tightly sealed.
Leakage from the connection of
U-shaped section and cover.
The blade, if damaged, can cause
vibrating.
The motor is not tightly fastened.
The rangehood is not tightly fixed.
Solution
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as per
the electric diagram.
Take down the outlet and
seal with glue.
Take u-shaped section
down and seal with soap or
paint.
Replace the blade.
Fasten the motor tightly.
Fixed the rangehood
tightly.