Related Manuals for Alango Technologies BeHear PROXY
Summary of Contents for Alango Technologies BeHear PROXY
- Page 1 TV LISTENING SYSTEM BeHear PROXY + HearLink PLUS Quick Start Guide support@alango-behear.com support@alango-behear.com www.alango-behear.com www.alango-behear.com...
- Page 2 Getting Started Connect HearLink PLUS to a power outlet (a) or the TV set’s USB port (b) using the supplied USB power cable. HearLink PLUS will turn ON automatically. Remove for Bypass use Verify that the mode switch is set to TX position Connect the HearLink PLUS TX port to the TV (or other media device) via the supplied optical or 3.5mm audio cable.
- Page 3 A on the HearLink PLUS panel. The LL is illuminated to indicate that the Low Latency APTX-LL Bluetooth CODEC is being used. If the automatic connection is delayed, briefly shift up the BeHear PROXY Power button to reconnect it to the HearLink PLUS transmitter.
- Page 4 Press to decrease the volume. A tone is played when minimum volume is reached. BeHear PROXY Remote Control Manage audio play using controls on the neck speaker. Short press to toggle Play/Pause audio. Press to increase the volume. A tone is played when maximum volume is reached.
- Page 5 Toggle the Play/Pause button on the BeHear neck speaker or button on the HearLink PLUS. If the automatic connection is delayed, briefly shift up the BeHear PROXY Power button to reconnect it to a previously paired HearLink PLUS transmitter.
- Page 6 Shift its power switch up and hold it until the voice prompt says: “Pairing mode active” and the LED blinks in alternating red and blue. Place the BeHear PROXY neck speaker close to the HearLink PLUS device. When pairing is complete (after 5-30 seconds) will be illuminated on the HearLink PLUS panel.
- Page 7 Mode switch to Bypass position, indicated by To restore connection with the BeHear PROXY neck speaker set the Mode switch to TX. More details about Hearlink Plus and BeHear PROXY can be found in their user manuals. www.alango-behear.com support@alango-behear.com...
Need help?
Do you have a question about the BeHear PROXY and is the answer not in the manual?
Questions and answers