Related Manuals for Alango Technologies BeHear ACCESS
Summary of Contents for Alango Technologies BeHear ACCESS
- Page 1 TV LISTENING SYSTEM BeHear ACCESS + HearLink PLUS Quick Start Guide support@alango-behear.com support@alango-behear.com www.alango-behear.com www.alango-behear.com...
- Page 2 Getting Started Connect HearLink PLUS to a power outlet (a) or the TV set’s USB port (b) using the supplied USB power cable. HearLink PLUS will turn ON automatically. Remove for Bypass use Verify that the mode switch is set to TX position Connect the HearLink PLUS TX port to the TV (or other media device) via the supplied optical or 3.5mm audio cable.
- Page 3 LED turns light blue. A voice prompt will be played. Power button Successful connection of the BeHear ACCESS is indicated by the illuminated A on the HearLink PLUS panel. The LL is illuminated to indicate that the Low Latency APTX-LL Bluetooth CODEC is being used.
- Page 4 Press to decrease the volume. A tone is played when minimum volume is reached. BeHear ACCESS Remote Control Manage audio play using the headset’s left-hand controls. Short press to toggle Play/Pause audio. Press to increase the volume. A tone is played when maximum volume is reached.
- Page 5 Helpful Information To charge the BeHear ACCESS headset, connect the small end of the supplied micro-USB cable to the charging cradle, and the large end via a power adapter to a wall socket (or directly to a USB port). Wall plug purchased separately...
- Page 6 Press its Power button and hold it until the voice prompt says: “Pairing mode active” and the LED blinks in alternating red and blue. Place the BeHear ACCESS headset close to the HearLink PLUS device. When pairing is complete (after 5-30 seconds) will be illuminated on the HearLink PLUS panel.
- Page 7 Mode switch to Bypass position, indicated by To restore connection with the BeHear ACCESS headset set the Mode switch to TX. More details about Hearlink Plus and BeHear ACCESS can be found in their user manuals. www.alango-behear.com support@alango-behear.com...
Need help?
Do you have a question about the BeHear ACCESS and is the answer not in the manual?
Questions and answers