Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used.
Page 3
0233A Night Stand (BOX1) BOX OF NIGHT STAND ITEM BUN FOOT NIGHT STAND x1 PC x4 PCS HARDWARE LIST (FIXED INSIDEDRAWER) ITEM Truss Head Chipboard Screw HTG1073 Handle Black Antique M4x28mm BIK Brass (With Thread 10mm) x2 PCS x2 PCS...
Page 4
STEP 1 Assemble Bun foot leg (1) to the bottom night stand as shown.
Page 5
STEP 2 Reinstall handle by loosen the handle screw then tighten up as shown. STEP 1 STEP 2...
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Page 8
Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP ! US office: Fontana UK office: Ipswich AU office: Truganina Contact Us ! Do NOT return this item. US:cs.us@costway.com UK:cs.uk@costway.com AU:cs.au@costway.com...
Need help?
Do you have a question about the HW61187 and is the answer not in the manual?
Questions and answers