Lan (Isdn Router) - Sony PCWA-C100 Operating Instructions Manual

Notes
• The Access Point is configured with the manual connection mode at the time of
shipment. Clicking To Connect initiates the dial-up connection.
• Note that automatic disconnection may not work due to unexpected packets sent
from the Internet. Click To Disconnect to disconnect the connection when you are
through with the Internet access.
z Tips
• When the Access Point is in the automatic connection mode, starting an e-mail or
browser application causes a dial-up attempt to be made. To place the Access
Point in the automatic connection mode, use the Custom Setup Utility. For more
information, see the Custom Access Point Setup Utility Help.
• The Access Point does not automatically disconnect a connection to the Internet
when an e-mail or browser application is closed on a single computer in order to
allow multiple computers to have simultaneous Internet access. Thus, to
disconnect the dial-up connection, you must follow the steps above.
With the factory default setting, the connection is automatically terminated after
two minutes.
You can change the automatic disconnection time by changing the Hangup After
setting.

LAN (ISDN Router)

1
Start your browser and make the connection through your
ISDN router. (For detials, see the ISDN router manual.)
The connection is made to your provider.
Note
When the ISDN router is in use, the To Connect/To Disconnect function of the
Wireless Palette is disabled.
2
Launch your Web browser.
A Web site is displayed.
35