LG NANO 81 User Manual page 74

4-Way Zoom
You can adjust the horizontal/vertical/diagonal dimensions of the screen and align the
screen horizontally/vertically by using
Position.
The configurable items differ depending on model.
The picture may get distorted while zooming in or out.
Selecting a different screen size from the original size may cause the image to look
different.
Depending on the combination of picture format and screen size, the edges may be hidden
or shown in black, or both sides of the picture may flicker. Also, when selecting an item
shown on the broadcast screen, the outline may not be aligned correctly.
Depending on the input signal, the available screen sizes may be different.
View Screen with
Picture Aspect Ratio Just Scan
If you turn this feature On, you can view the content in the aspect ratio that is in the
broadcast signal or content source. If the edge of the screen is not clean, please turn it
Off.
If set to Auto, the feature switches between
information contained in the video signal.
The items that can be selected may vary depending on the current input.
Adjusting the Brightness of a Picture
Picture Advanced Settings Brightness
You can adjust the brightness of the entire screen.
Panel Brightness
Controls the level of screen brightness by adjusting the backlight. The closer to 100,
the brighter the screen.
Decrease the
Depending on the
Panel Brightness
In this case, navigate to
and set to Off
Depending on your TV model, you might not have the
Just Scan
Panel Brightness
Energy Saving
.
or Minimum .
Adjust Zoom Ratio
On or Off
to reduce energy consumption.
Auto Maximum
( /
General Energy Saving Energy Saving Step
74
and Adjust Screen
status depending on the
), you may not be able to adjust the
Panel Brightness
setting.