LG NANO 81 User Manual page 103

Setting a Wired Network
General Network Wired Connection (Ethernet)
If the router connected to the network supports the DHCP feature, connecting the TV
and router by wire will automatically connects to the network. If the automatic setup is
not supported, you can select
Some models may not be supported.
Setting a Wireless Network
General Network Wi-Fi Connection
If you have set the TV up for a wireless network, you can check and connect to the
available wireless Internet networks. Select the wireless router to connect.
For more detailed settings, select
Add a hidden wireless network
If you input the name of network directly, you can add a wireless network.
Connect via WPS PBC.
If the wireless router you want to connect to has a Wi-Fi Protected Setup-Push Button
Configuration (WPS-PBC) feature, you can easily connect to the wireless router by
pressing the WPS-PBC button on the router. Press the wireless router's WPS-PBC
button and then press the TV's [Connect] button.
Connect via WPS PIN.
This is a method to connect to an access point using a Wi-Fi Protected Setup-
Personal Identification Number (WPS-PIN). Select the access point you want to
connect to. Enter the PIN displayed on the access point's Wi-Fi device.
Advanced Wi-Fi Settings
Once you connect to a wireless network, you can view connection information such as
detailed IP address information. In addition, you can change the IP address and DNS
server address you want to connect to by pressing the
For more information on how to connect to the network, see
webOS TV Connecting to the Network
Edit to manually set up the network connection.
Other Network
in User Guide
103
Settings.
Edit button.
Getting Started with LG
.