M.2 Solid-State Drive - Lenovo IdeaCentre Mini 01IRH8 User Manual

Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury, seek
medical care immediately. Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
There are no serviceable parts inside these components. If you suspect a problem with one of these parts,
contact a service technician.
For access, do the following:
1. Remove the computer stand. See "Computer stand" on page 12.
2. Remove the computer cover. See "Computer cover" on page 14.
3. Disconnect the power supply assembly cables from the system board.
Removal procedure

M.2 solid-state drive

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
For access, remove the following parts in order:
• "Computer stand" on page 12
.
Chapter 4 CRU replacement
19