Product Introduction - Hi-Link HLK-LD2410C Manual

1

product introduction

LD2410C is a high-sensitivity 24GHz human presence sensing module developed by Hilink Electronics. Its working principle is to use FMCW frequency modulation continuous wave
to detect human targets in the set space, combined with radar signal processing and precise human body sensing algorithm, to realize high-sensitivity human body presence status
sensing, which can identify human body in motion and static state, And it can calculate the auxiliary information such as the distance of the target.
This product is mainly used in indoor scenes, to detect whether there is movement or micro-movement of the human body in the area, and output the detection results in real time. The farthest
sensing distance can reach 5 meters, and the distance resolution is 0.75m. Provides a visual configuration tool, which can easily configure the sensing distance range, sensing sensitivity in different intervals
and unmanned delay time, etc., to adapt to different specific application requirements.
Support GPIO and UART output, plug and play, can be flexibly applied to different intelligent scenarios and terminal products.
Height 2.6~3 meters
wall
radar
Height 1.5~2 meters
LK-LD2410C
Figure 1 Diagram of usage
Page 3 of 21
radar
5 meters
manual
ceiling