Sony HDMS-S1D Supplementary Manual

HDMS-S1D
When Connecting to the HDMI OUT Jack
Improper handling may damage the HDMI OUT jack and the connector.
Make sure the connector is not upside down or tilted.
Connector is upside down Not straight
Insert the HDMI connector straight into the HDMI OUT
jack.
Do not bend or apply pressure to the HDMI connector.
Notes
 Be sure to disconnect the HDMI cord when moving the unit.
 Do not apply too much pressure to the cabinet wall, if you place the unit on the cabinet
with the HDMI cord connected. It may damage the HDMI OUT jack or the HDMI cord.
 When connecting or disconnecting, do not screw in or rotate the HDMI connector.
© 2007 Sony Corporation Printed in Japan 3-281-885-11(1)