Transmitting; Receiving - Kenwood NX-3220E2 User Manual

TRANSMITTING

1 Select the desired zone and channel using the Selector or 4-
way D-pad and the [Zone Up]/ [Zone Down] or [Channel
Up]/ [Channel Down] buttons.
2 Press the PTT switch and speak into the microphone. Release
the PTT switch to receive.
The LED indicator lights red while transmitting and green while
●
receiving a signal. This indicator can also be disabled by your
dealer.
For best sound quality at the receiving station, hold the
●
microphone approximately 3 cm to 4 cm (1.5 inches) from your
mouth.

RECEIVING

Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only if
the received signal matches your transceiver settings.
26