Table of Contents
Advertisement
Preparation
Remove the test
Turn on the tap and
strip from the
let the water run for
packet.
about a minute.
After determining hardness level of the supply water:
1. After turning on your machine, press and hold the Time Delay and Start / Pause / Cancel keys
respectively.
2. Using the Time Delay key, turn on 9 and 3 LEDs.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
English Water
Hardness Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
In order to protect your glassware against glass corrosion in an optimal way, you have to
perform the same hardness settings, which you have made in the control panel, with the
regeneration setting switch.
For example, if you have adjusted to "3rd level" in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
Dishwasher / User's Manual
Hold the test strip in
the water for about
a second.
German Water
French Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
0th Level
1
Remove the test
Wait for 1 minute.
strip from the water
and shake it.
Water Hardness Level Indicator
Press the 1st programme key to set the water hardness
setting to position 1.
Press the 2nd programme key to set the water hardness
setting to position 2.
Press the 3rd programme key to set the water hardness
setting to position 3.
Press the 4th programme key to set the water hardness
setting to position 4.
Press the 5th programme key to set the water hardness
setting to position 5.
1st Level
2nd Level
3rd Level
1
2
The test strip shows
you the hardness
level.
4th Level 5th Level
3
4
5
13 / 40 EN
Advertisement
Table of Contents
