Inateck KB02026 Instruction Manual page 3

Step 2: Press +
flash 3 times and then the blue light flashes, which means the keyboard has entered into Bluetooth pairing
mode. Under this mode please re-pair the keyboard with the Surface Pro.
5. Indicator
Indicator
Indicator 1: Red
Indicator 1: Green
Indicator 2: Green
Indicator 3: Blue
Note:
"Flash" means the light alternates between on and off status quickly, 3 times a second.
6. How to Adjust the Keyboard Backlight
1) Press +
2) Press +
choice.
Note:
1) When the battery level is lower than 15%, the backlight turns off automatically.
2) The backlight will go off automatically if the keyboard is left idle for two minutes. You can wake it up by
pressing a single key.
7. How to Use the Function Keys
7-1. How to Use F1-F12
You may press the
keyboard disables the Fn key lock by default. )
Fn Lock enabled:
simultaneously and hold for 5 seconds. The 3 indicator lights will simultaneously
Status
Flash
Always on
Always on
Always on
Off
Always on
Off
Flash
simultaneously to adjust the color of the backlight. There are 7 colors available in total.
simultaneously to adjust the brightness of the backlight. 3 levels of brightness are at
+ keys to lock the Fn key. A repeated operation can unlock the Fn key. (The
Meaning
Battery volume ≤ 20% and not in charge
Battery volume ≤ 80% and being charged
Battery volume >20% and not in charge
Battery volume >80% and being charged
Caps Lock On
Caps Lock Off
Bluetooth Connected
Bluetooth Not Connected
Bluetooth Pairing/re-paring
2