The Radio; Presetting Radio Stations - Sony CFD-S40CP Operating Instructions Manual

The Radio

Presetting radio
stations
You can store radio stations into the player's
memory. You can preset up to 30 radio
stations (Korean model), 20 for FM and 10
for AM in any order or 40 radio stations
(Other models), 20 for FM and 10 for MW
and LW in any order.
1
Press BAND•AUTO PRESET to select
the band.
2
Hold down BAND•AUTO PRESET for
2 seconds until "AUTO" flashes in the
display.
3
Press DISPLAY/ENTER•MEMORY.
The stations are stored in memory from
the lower frequencies to the higher
ones.
If a station cannot be preset
automatically
You need to preset a station with a weak
signal manually.
1 Press BAND•AUTO PRESET to select
the band.
2 Tune in a station you want.
3 Hold down DISPLAY/ENTER•
MEMORY for about 2 seconds.
4 Turn the jog dial until the preset number
you want for the station flashes in the
display.
BAND• 5 Press DISPLAY/ENTER•MEMORY.
AUTO
The new station replaces the old one.
PRESET
On the remote
1 Press BAND until the band you want appears in
DISPLAY/
the display.
ENTER•
2 Tune in a station you want.
MEMORY
3 Hold down the number buttons that you want to
preset the new station on for about 2 seconds.
To select the preset number over 10, press >10
first, then the corresponding number buttons.
You need to hold down the last number button to
enter for about 2 seconds.
(example: To select 12, press >10 and 1 first,
then hold down 2 for about 2 seconds.)
GB
19