(Programme Play) - Sony CFD-S40CP Operating Instructions Manual

Creating your own
programme
You can arrange the playing order of up to
20 tracks on a CD.
1
Press x.
"CD" appears in the display.
2
Press MODE until "PGM" appears in
the display.
3
Turn the jog dial to select the track you
want to programme, and press
DISPLAY/ ENTER•MEMORY.
Repeat this step.
Programmed track
4
Press u to start programme play.
On the remote
1 Press x.
2 Press MODE until "PGM" appears in the
display.
3 Press the number buttons for the tracks you want
to programme in the order you want.
4 Press N.
GB
18

(Programme Play)

MODE
DISPLAY/
ENTER
MEMORY
Jog dial
u
x
Playing order
To cancel Programme Play
Press MODE until "PGM" disappears from
the display.
To check the order of tracks
before play
Press DISPLAY/ENTER•MEMORY.
Every time you press the button, the track
number appears in the programmed order.
To change the current
programme
Press x once if the CD is stopped and twice
if the CD is playing. The current programme
will be erased. Then create a new
programme following the programming
procedure.
When playing MP3 files
• In TRACK mode, you can programme up
to 20 files the same as you would for
audio CD tracks.
• In FOLDER mode, you can programme
up to 20 folders and play all tracks in the
programmed folder in the programmed
order.
Programmed folder
Tips
• You can play the same programme again, since
the programme is saved until you open the CD
compartment.
• You can record your own programme. After
you've created the programme, insert a blank
tape and press z to start recording.
• The resume function doesn't work during
Programme Play.
Playing order