Samsung HW-C400 Full Manual page 13

Hide thumbs Also See for HW-C400:
Table of Contents

Advertisement

7 Band EQ
Press and hold the
band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons
and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound
mode is set to "Standard".)
Press and hold the
for about 5 seconds.

Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
LED
Indicator
p (Play / Pause)

You can also play or pause music by pressing the button in "USB" mode.
Up/Down/Left/Right

Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music
file.

(Info)
Press the button to display information about the current function. (See page 9.)
(Sound Control) button for about 5 seconds to adjust the sound for each frequency
5 Sec
(Sound Control) button
"150Hz"
Red
Green
Blue Blinks
PAIR
Pairing
SOUND
MODE
VOL
WOOFER
7 Band EQ
Using the Left/Right buttos and each can be
adjusted to setting between -6 to+6.
"150Hz"
ENG - 13
"300Hz"
"600Hz"
"2.5kHz"
"5kHz"
"10kHz"
Cyan Blinks X3
Connection is complete
"1.2kHz"

Advertisement

Table of Contents
loading

Table of Contents