General Installation - Fortinet FortiWeb 1000E Quick Start Manual

Terminal Emulation with Console
B
Cable
Console Port
To Connect to the CLI
1. Connect the FortiWeb unit console port
provided console cable.
2. Start a terminal emulation program on the management computer. Select the
port and use the following settings:
Baud Rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
3. Press Enter on your keyboard to connect to the
4. Login using username "admin" and no
configuring your FortiWeb unit.
Get started by typing "?" for a list of available commands.
Begin typing a command and type "?"
For example "config ?" shows the lowest level of configuration options.
For a detailed guide, visit http://docs.fortinet.com/fortiweb/reference.
6
Serial Port
to the management computer using the
COM
CLI.
password. You can now proceed with
for a list of available ways to complete.

General Installation

3
The FortiWeb unit can be mounted in any standard
rail mount kit.
Please read the "Cautions and Warnings" on page 20 prior to installing your device.
To install the FortiWeb unit into a rack:
1. Ensure that the FortiWeb unit is placed on a stable surface prior to
installation.
2. Assemble the rails and install the system in the rack following the
and the rack installation instructions in
3. Verify that the spacing around the FortiWeb unit conforms to requirements and that
the unit is level.
4. Connect the provided power cables to the system.
5. Plug the other end of the power cables into separate power sources, such as
uninterruptible power supplies (UPS) or
6. Insert one end of the provided Ethernet cable
FortiWeb unit. Insert the other end to a
Internet.
7. Press the power button on the system to turn on the device.
Do not place heavy objects on the unit.
19 inch rack unit with the provided
rack-mount
safety instructions
Rail Installation (p. 8).
power distribution units (PDU).
into one of the Ethernet ports on the
router or switch that is connected to the
7