EDIFIER K6500 - USB Computer Headset Manual

Product description

To obtain the qualified recording quality, please let the side with the green fluorescent mark face outwards.

Note: Images are for illustrative purposes only and may differ from the actual product.

Power on/off

Insert the USB plug into a computer

Power on: Insert the USB plug into a computer, the headset should be ready to go and LED light will be lit.
Power off: Unplug the USB plug from the computer, the headset will power off and LED light will be off.

Modes description

Exam mode: Volume buttons cannot function in this mode, please adjust volume level via the connected computer.

Training mode: Press volume buttons to adjust the headset volume level; press and hold volume buttons to adjust voice feedback and microphone volume level.

Music mode: Press volume buttons to adjust the headset volume level; press and hold volume buttons to adjust microphone volume level.

Note:

• In Training mode or Music mode, if microphone volume level is adjusted to zero via the headset or the connected computer, or microphone on the connected computer is muted, LED light will flash with a prompt tone.
• In Exam mode, if microphone volume level is adjusted to zero via the connected computer, or microphone on the connected computer is muted, LED light will flash with a prompt tone.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download EDIFIER K6500 - USB Computer Headset Manual