EDIFIER USB K800 - USB Computer Headset Manual

Product Description

LED lights

Microphone is mute: red LED light is lit
Power on: blue LED light is lit
Power off: blue LED light is off

Functional Operation

Power on: Please insert the USB-A plug of the headset into a computer, the headset should be ready to go and blue LED light will be steady lit, now you can play or input audio;

Power off: Please unplug the USB-A plug from the computer, LED light will be off;

Mute: Please switch to mute state through the computer, microphone will turn off and red LED light will be lit;

Volume control: Please adjust the headset and microphone volume through the computer.

Note: Images are for illustrative purposes only and may differ from the actual product.

Maintenance

• Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
• Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and make plastic components deformed.
• Do not put the product in cold places to avoid damaging internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download EDIFIER USB K800 - USB Computer Headset Manual