D-Link DIR-615 User Manual page 92

DIR-615 Wireless N300 Router
Configuring via Web-based Interface
User Manual
In the Static IP Addresses section, you can specify MAC address and IP address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The router
assigns IP addresses in accordance with the specified pairs only when the DHCP server is enabled
(in the Dynamic IP Addresses section, the DHCP server value is selected from the Mode of
dynamic IP address assignment drop-down list).
Figure 79. The section for creating MAC-IP pairs.
To create a MAC-IP pair, click the ADD button. In the opened window, in the MAC address field,
enter the MAC address of the device from the LAN, then in the IP address field, enter an IPv4
address which will be assigned to it. In the Host field, specify a network name of the device for
easier identification (optional). Click the APPLY button.
In order to view MAC addresses of the devices connected to the router at the moment, click the
CLIENTS LIST button. In the opened window, select the needed device and click the OK button.
To view the latest list of the connected devices, click the REFRESH button.
To edit an existing MAC-IP pair, left-click the relevant line in the table. In the opened window,
change the needed parameters and click the APPLY button.
To remove a MAC-IP pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button. Then click the APPLY button. Also you can remove a MAC-IP pair
in the editing window.
Page 92 of 184