6 Programming Menu
6.1 Programming Menu Overview
The programming menu allows the user to configure the TG Series in a variety of ways. Refer to
the Table in Fig. 6‐1 below and the subsequent sections for specific information on
Programming menu editing. Menu changes remain saved even when the meter is powered
down.
6.2 Programming Menu Editing
1. Pull the meter trigger for one second to power the meter.
2. Press and hold Menu to enter the Programming Menu. The menu icon will appear on
the upper left hand corner.
3. Use the arrow buttons to scroll through the menu items and pages (not all menu items can
be displayed on one page; use the arrow buttons to scroll through pages).
4. The current option will be highlighted.
5. There are four types of menu items:
a. Items that can be toggled with the Menu button (two‐option items); these are Laser
ON/OFF and Temperature Units
b. Items that can be set by repeated presses of the Menu button; these are Display mode
and APO
c. Items that can be viewed by pressing Menu (Info
d. Items that can be opened by pressing the Menu button for further editing steps
(Emissivity
6. Each menu item is detailed in the following sections.
FLIR TG54_TG56 User Manual
o
C/
menu items.
and Alarm
modes)
o
F.
and Help
16
Document Identifier: TG54_TG56‐en‐US_AA
screens)