Table of Contents
Advertisement
Installation Instructions
Allowable Clearances for Closet Installation
When installed in closet (washer only/washer dryer stacked) :
Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm)
Closet door ventilation requirement: A louver having minimum 23 in2 (148
cm2) air opening located at 3 in (7.62 cm) from the bottom of closet door.
Stacked Installation
You can stack your Blomberg washer and dryer by using a special
stacking kit. If necessary, consult your dealer or technical service
for supplying the stack kit. In stacked closet installation, following
configuration is necessary:
A louver having minimum 23 in2 (148 cm2) air opening located at 3
in (7.62 cm) height from the bottom of closet door (for washer) & A
louver of minimum 46 in2 (297 cm2) air opening located at 3 in (7.62
cm) distance from the top of closet door (for dryer).
Removing packaging reinforcement
Tilt the washer to remove the packaging reinforcement. Remove the
packaging reinforcement by pulling the ribbon.
16 / English
Front-Loading Automatic Washer
Advertisement
Table of Contents
