Operati O; Initial Power-Up Of System; Menu Description - Saelig AFV Series Manual

5.1 In i t ia l p o w e r - up of s y s t e m
The input and output wirings should be properly connected according to the input and output
connection shown in Section 3.3. When the system is started, the main engine fan begins to
operate and the panel display screen becomes active. Also, the main interface is entered,
indicating that the start-up is normal. The parameters can then be set for the machine.
Note: If there is an external load, the load switch should be disconnected first, and the
input switch should be connected (it needs to confirm whether the electric power of the
input terminal row is normal before the input switch is connected).
The application interface can be entered by clicking "Application". Users can set the
output voltage and frequency value, then press the [Operation] key when completed. Clicking
"Meas." displays the actual output for phase voltage, current, frequency, etc.

5.2 Menu description

A ppl i c a t i on
The application interface displays phase voltage, current and frequency of output terminal of
the AFV(equipment).
S y s t e m
In the application interface, time setting and system maintenance can be set as required.
E ve n t
Records the historical work information of the equipment.
5 Operation
Chapter
13