Advertisement
Push Button Operation:
VADER User Guide (MAN405)
Turning the unit ON:
Press the orange Push Button to turn the Power ON.
Turning the unit off:
Now depressed, the blue LED should start blinking.
If the power is already ON,
Connection Status Indicator (Blue Push Button Lamp):
Press the Push button to turn the Power OFF. The blue LED should stop blinking.
Power ON indications:
Not Connected : Single Blink from the blue LED
The VADER is On and is ready to connect to a data logger.
Connected : Double Blink from the blue LED
Power OFF indication:
The VADER has successfully connected to a data logger.
The blue LED is Off
Normally it will be Off because the unit was turned Off
Connecting an Android™ device to the VADER:
or the battery voltage level is extremely low.
Install the desired applications (TSS, PLS, or VM Lite) on your Android™ device.
Our applications support Android™ 7 through 13.
Revised October 16,2023
Page 4 of 7
Advertisement
