Charging The Battery; Charging Status - M.C. MILLER VADER User Manual

Charging the Battery:

VADER User Guide (MAN 405)
Please charge the battery fully prior to using the VADER!
With the unit turned off, open the case and locate the charge port and charge
lamp on the upper left hand side.
Connect the charging cable to the included AC adapter and plug the adapter into a
standard 120VAC 60Hz outlet. The other end of the cable plugs into the charge port on
VADER. DO NOT attempt to close the cover with the charger connected.
the

Charging Status:

The red charge lamp on the VADER should illuminate indicating the unit is
charging.
As the unit charges the lamp will dim, when the red charge lamp on the VADER
turns off, the unit is fully charged and ready for use.
When the VADER is powered on and connected to a compatible Android™
device, the voltmeter application on the tablet indicates the battery status by the green
rectangle in the top right corner of the screen. When nearly discharged, the battery level
line will change from green to red.
When using the supplied charger and cable the VADER should fully recharge in
approximately 8 hours.
Revised October 16,2023
Page 3 of 7