Summary of Contents for M.C. MILLER VADER
- Page 1 VADER User Guide (MAN405) Page 1 of 7 VADER User Guide(MAN405) (Items #12430 & #12435) M. C. Miller Co., Inc. 11640 US Highway 1 Sebastian, FL 32958 772.794.9448 sales@mcmiller.com www.mcmiller.com Revised October 16,2023...
-
Page 2: Table Of Contents
Power ON indications:...........................4 Not Connected (Single Blink):........................4 Connected (Double Blink):..........................4 Power OFF indication:........................... 4 The BLUE LED is Off:............................4 Connecting an Android™ device to the VADER: ....................4 External connections:............................5 Included Accessories: ............................5 Voltmeter Characteristics: ...........................6 Specifications: ..............................7 Revised October 16,2023... -
Page 3: Charging The Battery
The red charge lamp on the VADER should illuminate indicating the unit is charging. As the unit charges the lamp will dim, when the red charge lamp on the VADER turns off, the unit is fully charged and ready for use. -
Page 4: Push Button Operation
Press the Push button to turn the Power OFF. The blue LED should stop blinking. Power ON indications: Not Connected : Single Blink from the blue LED The VADER is On and is ready to connect to a data logger. Connected : Double Blink from the blue LED Power OFF indication: The VADER has successfully connected to a data logger. -
Page 5: External Connections
External Connections: VADER User Guide (MAN405) Page 5 of 7 • Red and Black Sheathed Banana Jacks • 5 Pin Connector (Compatible with M. C. Miller Equipment) Included Accessories: • Charging Cable - Mini USB • 12W USB Charger • 6 Foot Red and Black Test Leads with Clips and shrouded banana plugs (1 each) •... -
Page 6: Voltmeter Characteristics
Voltmeter Characteristics: VADER User Guide (MAN405) Page 6 of 7 • High Voltage Isolation for Operator Safety : Tested to 1kV steady-state/15kV transient voltage levels (designed for higher voltage level isolation) – operator isolated from power supply • Non-Saturating : Voltmeter will not saturate on 5.7VDC and higher ranges with superimposed AC... -
Page 7: Specifications
VADER User Guide (MAN405) Page 7 of 7 Specifications: Voltmeter range, display resolution and accuracy specifications for the VADER, Input Impedance and Response Time (to 99% of final value). Range Display Resolution Accuracy (% reading value) 40mVDC, 10MΩ, 80ms 0.01mV ±0.2% ±0.08mV...