Operating Elements - Bosch ErgoMixx MFQ364 Series User Manual

▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never leave the appliance switched on if the power supply is in-
terrupted. The appliance will automatically start up again follow-
ing the interruption in the power supply.
▶ Only attach and remove accessories once the drive has stopped
and the appliance has been unplugged.
▶ Never touch the edges of the blades with bare hands.
▶ Care should be taken when handling sharp blades, emptying the
container and during cleaning.
▶ Be careful when processing hot food.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
Avoiding material damage
▶ Do not operate the appliance at no-load.
▶ Never use the blender jug in the mi-
crowave or oven.
Overview
→ Fig.
1
Switch
1
Ejector button
2
Release buttons
3
Apertures (with lock) for inserting
4
the tools
Slide for actuating the lock
5
Cable clip
6
Rear aperture with lock
7
Turbo whisks
8
Kneading hooks
9
1
Depending on the model
2
separate operating instructions
1
Avoiding material damage en
1
Lid
10
Plastic blender jug
11
Blender foot
12
Universal cutter
13
1
Depending on the model
2
separate operating instructions
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.

Operating elements

Ejector button
For removing the tools.
Note: The ejector button can only be actu-
ated if the switch is position ⁠ .
Slide
When the slide is actuated, either the aper-
tures for inserting the tools
aperture is released.
Only move the slide in switch position .
1
1
1 2
or the rear
9