Operating Instructions; Location And Function Of Controls - LG Comfort-Aire RAD-141A Owner's Manual

Operating Instructions

Location and Function of Controls

CAUTION: If you turn off the air conditioner or switch from cooling to
the fan, wait at least 3 minutes before setting to cooling again.
Operation
5
6
4
3
2
1
Thermostat
Auto Swing
FOR NORMAL COOLING
1. Turn the operation switch to the High Cool or the Low Cool setting.
2. Set the thermostat control to the desired temperature mark (the mid-point is a
good starting position). If the room temperature is not satisfactory after a
reasonable time, adjust the control to a cooler or warmer setting, as
appropriate.
FOR MAXIMUM COOLING
1. Turn the operation switch to the High Cool setting.
2. Set the thermostat control to the largest temperature mark.
FOR QUIETER OPERATION
1. Turn the operation switch to the Low Cool setting.
2. Set the thermostat control as needed.
O ff
Me d Fa n - Med speed fan operation without cooling.
Low Fa n
High C ool - Cooling with high speed fan operation.
Me d C ool - Cooling with med speed fan operation.
Low C ool - Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
7
Turn the knob so that arrow points to the larger marks for greater cooling.
8
Point the arrow to the smaller marks for more moderate cooling.
(i.e. the higher the number, the greater the cooling)
9
Auto Swing
For fixed side-to-side air direction, set the
Auto Swing switch to ON until the desired air
direction is obtained, then move it to OFF.
For continuous side-to-side air circulation (cool
settings only), set the Auto Swing switch to ON.
- Turns air conditioner off.
- Low speed fan operation without cooling.
Operating Instructions
Owner's Manual 17