Setting The Network Preferences For Your Provider And Dial-Up Server; Selecting A Service Template; Entering A User Name - Sony CLIE PEG-UX40 Handbook

Setting the Network preferences for your
provider and dial-up server
Note
For the settings specific to a peripheral device, refer to the manual of that device.

Selecting a service template

You can customize the Service setting to select the service template for your
Internet Service Provider or a dial-up server.
1
Tap V at the top right of the Preferences screen, and select
[Network].
The Preferences screen for Network is displayed.
2
Tap [V Service:], and select the service template (Internet
Service Provider name) you want to use.
Tips
• To add a new service template, select [New] from the Service menu.
If the Internet Service Provider name you want to use is not displayed in the list,
tap the area showing the service template, or select [New] from the Service
menu, and enter the new Internet Service Provider name.
You can create multiple service templates for your Internet Service Provider.
You should name them so that those service templates are uniquely identified,
such as "So-net1" and "So-net2". This is useful when using your Internet Service
Provider by access point. It is also useful when setting the service template.
• If you want to copy an existing service template without changing, select
[Duplicate] from the Service menu.

Entering a user name

The User Name setting identifies the name you use when you log into your
Internet Service Provider (ISP) or dial-up server.
1
Tap the User Name field on the Preferences screen for
Network.
2
Enter your user name.
Notes
• Although this field can contain multiple lines of text, only two lines are displayed
on-screen at a time.
• Most dial-up servers do not accept spaces in the user name.
Customizing your CLIÉ™ handheld (Preferences)
85