Advertisement
Note: When one LAN accesses multiple CWC15 gateways, IP addresses of these
gateways are displayed, as shown in ②. In this case, one-to-one correspondence
between the CWC15 gateways and the IP addresses cannot be achieved. It is
recommended that every time when the user completes configuring a CWC15 device,
the user should timely rename the CWC15 device and record its IP address.
The following figure shows how to configure multiple CWC15 gateways:
① Click "CWC15 Management". ② Click "+" at the upper right corner. The CWC15
configuration interface is displayed. ③ Select a configuration manner. The subsequent
steps are the same as those for configuring the CWC15 via a network cable. Repeat
the preceding steps to add multiple CWC15 devices until all the CWC15 devices are
configured.
17
Advertisement
