Advertisement
2-1: Using a Network Cable
Only when the following conditions are met, can the user configures the CWC15 via a
network cable:
A. The CWC15 must access a wireless router.
B. The smart phone and CWC15 must be located in one network segment and connected
to one wireless router.
C. The wireless router must access the Internet.
①Select a configuration manner.
②The App will search for the CWC15 devices on its LAN and displays the IP address of
each CWC15 gateway. As shown in the figure above, ② displays multiple CWC15
devices found. Only one CWC15 device can be selected for configuration. Select one,
and the system counts down. After configuration succeeds, it goes to the main interface
for displaying devices.
16
Advertisement
