Air Inlet; Regular Maintenance - M7 RA-3023 Manual

Maintenance:
1. Before connecting the air hose to this tool or after operating, apply 4 or 5 drops of pneumatic oil into the
air inlet and run it for several seconds, referring this operation to the attached picture.
2. Maintain this tool regularly by performing the same oiling application every 3 to 4 hours of operation.
3. Do not lubricate tools with flammable or volatile liquids. Use only the lubricant recommended by Mighty-
Seven or authorized dealers. Any other lubricant will lead to reduce performance of the tool and
permanent damage. Whenever any unauthorized lubricant is used by accident, flush it immediately
with recommended pneumatic oil.
4. Follow all the recycling laws of waste disposal once this tool is no longer usable
Pneumatic oil

Regular maintenance

4

Air inlet