Huawei Mate30 Pro User Manual page 151

Enable Read and write/P2P on the NFC settings screen if available. Features may vary
depending on your carrier.
1
Go to Settings > More connections, and enable NFC and Huawei Beam on both the
sending and recipient phones.
2
On the sending phone, touch and hold the file to be shared, go to More > Share or touch
, and select Huawei Beam.
Operations may vary if you are sharing files from apps directly.
3
Keep the two phones unlocked and the screens on, and hold the NFC sensors (located
near the rear camera) of the two devices together until a beep is heard and the share
screen shrinks, indicating a successful connection. The files will then start transferring.
Once the transfer has started, you can separate the two devices slightly, but keep
them within 10 cm of each other.
Huawei Share
Huawei Share is a wireless sharing technology that allows you to quickly transfer images,
videos, documents, and other types of files between devices. This technology relies on
Bluetooth to discover nearby devices, and uses Wi-Fi Direct to transfer files without using
mobile data.
Enable or Disable Huawei Share
You can enable or disable Huawei Share in either of the following ways:
Swipe down from the status bar to open the notification panel, then touch
•
or disable Huawei Share. Touch and hold the switch to enter the Huawei Share settings
screen.
Go to Settings > More connections > Huawei Share, enable or disable Huawei Share.
•
Enabling Huawei Share automatically turns on Wi-Fi and Bluetooth.
Quickly Share Files Between Phones
You can use Huawei Share to quickly share files between Huawei phones. The recipient can
preview the files before they are sent, then view the full content of the files once they have
been received. For example, the recipient can view received pictures or videos in Gallery.
Settings
to enable
147