Table of Contents
Advertisement
SETUP AND INSTALLATION
Remote setup
Installing / replacing the batteries
1.
Press firmly and slide the battery cover off.
2.
Install new battery into the compartment. Remove the old battery and
install new one (CR2025). Ensure that the side with a "+" is facing
up.
3.
Put the cover back.
CAUTION:
To ensure safe operation, please observe the following precautions:
‡
Replacement of a battery with an incorrect type that can defeat a safeguard (AAA size battery type);
‡
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can
result in an explosion;
‡
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas; and
‡
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of
flammable liquid or gas.
Note:
The inclusion of the battery and the battery type for the remote control may vary depending on the region.
19
English
Advertisement
Table of Contents
