Table of Contents
Advertisement
User Manual
/
CBA850
•
SNMPv2c: SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will
configure the router to use settings and data formatting compatible with SNMP version 2c.
•
SNMPv3: SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure
setting for SNMP. If you wish to configure traps then you must use SNMP version 3.
SNMP v1 & v2c Settings
•
Get community string: The "Get community string" is used to read SNMP information from the router. This
string is like a password that is transmitted in regular text with no protection.
•
Set community string: The "Set community string" is used when writing SNMP settings to the router. This
string is like a password. It is a good idea to make it different than the "Get community string."
SNMPv3
If you select SNMPv3, you have several additional configuration options for added security.
•
Authentication type: Select the authentication and encryption type that will be used when connecting to
the router from the following dropdown list. These settings must match the configuration used on any
SNMP clients.
•
MD5 with no encryption
•
SHA with no encryption
•
MD5 with DES encryption
•
SHA with DES encryption
•
MD5 with AES encryption
•
SHA with AES encryption
Username: Enter the Username configured on your SNMP host in the username field.
•
•
Password: Enter the Password for your SNMP host in the password and verify password fields. This
password must be at least eight characters long.
Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for
•
trap notifications. Trap notifications are returned to the server with SNMPv1.
Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap
•
community name.
•
Address for trap server: Enter the address of the host system that you want trap alerts sent to.
•
Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default:
162)
General Settings
System information via SNMP is Read-Writable by default. However, if a value is set here, that field will become
Read Only.
•
System Contact: Input the email address of the system administrator.
•
System Name: Input the router's hostname.
•
System Location: Input the physical location of the router. This is simply a string for your own information.
©2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
8/25/16
51
Advertisement
Table of Contents
