Troubleshooting measures falling outside of the humidity. guarantee will be carried out by Silent Gliss or another appropriate retailer at the cost of the purchaser. Other applicable documents Installation...
Any repair work required by the system may only be carried out by authorised specialists. EU conformity has been certified. This documentation can be Only original replacement parts may be used for requested from Silent Gliss. repairs. Cleaning The product and its components, such as mouldings end caps, etc., must not be treated with aggressive...
Roman Blind Child Safety Parts - Assembly Instructions Please find below sewing instructions for the new Silent Gliss Roman blind child safety parts. These can only be used with Silent Gliss Roman blind headrail systems. The safety eyelet and bottom ring assemblies must be used in conjunction with each other.
Roman Blind Chain Shortening Instructions Note - The distance from the floor to the bottom of the chain must be at least 1.5 m Note - The Safety Retainer 10400 should be installed at the maximum distance from the operating mechanism to prevent the looped chain becoming slack.
Child Safety Warning! Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck. Move beds, cots and furniture away from window covering cords.
Need help?
Do you have a question about the 2304 and is the answer not in the manual?
Questions and answers