Table of Contents
Advertisement
SATA Configuration
The BIOS will automatically detect the presence of SATA devices. There is a sub-menu for each
SATA device. Select a device and press <Enter> to enter the sub-menu for detailed options.
SATA Controller(s)
This item enables/disables Serial ATA Device.
Options: Enabled (Default) / Disabled
SATA Mode Selection(only for H170GTN&Z170GTN)
This item determines how SATA controller(s) operate.
Options: AHCI (Default) / RAID
Note
»
The following items appear only when you set the SATA Mode Selection to [RAID].
SATA Express 1 - RST Pcie Storage Remapping
Options: Disabled (Default) / Enabled
SATA Express M2 - RST Pcie Storage Remapping
Options: Disabled (Default) / Enabled
SMART Self Test
This item runs SMART Self Test on all HDDs during POST.
Options: Disabled (Default) / Enabled
SATA Hot Plug
Designates SATA port as Hot Pluggable.
Options: Disabled (Default) / Enabled
B150GTN & H170GTN & Z170GTN
2. Advanced Menu | 13
Advertisement
Table of Contents
