Beko WMY 71283 LMXB3 User Manual page 20

• Anticrease+
This function is selected when the 3rd auxiliary function is pressed and held for 3 seconds and the
programme follow-up light for the relevant step turns on. When the function is selected, the drum rotates
for up to 8 hours for preventing the laundry from creasing at the end of the programme. You can cancel the
programme and take your laundry out at any time during the 8-hour duration. Press the function selection
key or the machine on/off key to cancel the function. The programme follow-up light will remain on until the
function is canceled or the step is complete. If the function is not cancelled, it will be active in the subsequent
washing cycles as well.
4.3.8 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing
End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time
indicator is illuminated.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. ":" symbol in the middle of the end time on the display
starts flashing.
Adjusting the end time
If you want to cancel End Time function, press On / Off button to turn off and on the product.
C
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
C
You must press Start/Pause and wait for the door to open to add laundry into the machine during the End Time countdown.
Press Start/Pause once again after adding the laundry to resume the countdown. At the end of the countdown, End Time
indicator turns off, washing cycle starts and the time of the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen is the total of the end time chosen with the
duration of the selected programme.
4.3.9 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no key is pressed within 10 minute during programme selection process, the product will turn
off automatically. Display and all indicators will turn off.
If you press on the On / Off button, the programme information set as default will be displayed.
4.3.10 Loading door lock
There is a locking system on the loading door of the product that prevents opening of the door in cases when
the water level is unsuitable.
"Door Locked" light in the panel turns on when the loading door is locked.
4.3.11 Changing the selections after programme has started
After the programme has started you can make the following changes.
Switching the product to pause mode
Press the Start/Pause button to switch the machine to pause mode while a programme is running. The light
of the step which the machine is in starts flashing in the Programme Follow-up indicator to show that the
machine has been switched to the pause mode. Also loading door light blinks until the door is ready to be
opened. When the loading door is ready to be opened Loading Door light will turn off, programme step light
will continue to flash.
20 / EN
Washing Machine / User's Manual