Removing The Cutting Disc - Vorwerk Thermomix User Manual

Filling with ingredients
Holding function When you press the pusher down fully, it clicks into this position (holding
Note about the pusher You do not need to use force to press down the ingredients. Placing your
Clearing a jammed disc If the cutting disc becomes stuck, lift up the pusher and press it down again
70
2
You can find an overview of the best types of cut for different ingredients
in the welcome booklet.
1. Loosely pour the ingredients into the appropriate opening, a little at a
time.
2. If an ingredient is too large for the opening, cut it in half or into several
pieces as required.
3. Lightly press the ingredients down using the pusher (3).
function). Always allow the pusher to click into position at the end of the
cutting or grating process. This will ensure that it does not fall out when you
remove and invert the cutter lid.
hand on the pusher and applying minimal pressure is sufficient.
If you find that you are unable to press the pusher down, check whether the
opening is too full or food has become stuck.
onto the food using minimal pressure.
If the jam does not clear:
1. Stop the cutting/grating process and carefully remove the blockage
using the spatula.
2. Never reach into the blades with your hands!
If food has become stuck on the underside of the cutter lid around the edge
of the fill compartment, you can easily remove it using the spatula.
6.4

Removing the cutting disc

If you want to remove or invert the cutting disc, proceed as follows:
Cutter
3
1