Insignia NS-PNM6103-BK, NS-PNM6103-BK-C - Bluetooth Mouse Quick Setup

Also See for NS-PNM6103-BK:

Table of Contents

PACKAGE CONTENTS

Windows® 10, Windows®8.1, Windows®8, Windows®7, or Mac OS 10.x or higher Before using your new product, please read these instructions to prevent any damage.
Built-in Bluetooth function or Bluetooth receiver

FEATURES
Before using your new product, please read these instructions to prevent any damage.

FUNCTION	DESCRIPTION
LED indicator	Lights for three seconds when you turn on your mouse. Blinks two times per second when your mouse is in pairing mode. Turns off immediately when pairing is complete. Blinks every five seconds when the battery is low; becomes more rapid when power is almost gone.
CONNECT button	Press to put your mouse in pairing mode.

Open the battery compartment and insert one AA battery (included). Make sure that you match the + and – symbols in the battery compartment.
Press the CONNECT button on the bottom of the mouse. The LED indicator blinks twice to indicate your mouse is in pairing mode.
Pair your mouse to your computer.
PC:
1. Click the Bluetooth icon in your computer's taskbar.
2. Click Add a Bluetooth device. Your computer searches for your mouse.
3. Double-click Bluetooth 3.0 Mouse.

Mac:

Open System Preferences in the dock.
Click the Bluetooth icon.
Click + in the lower-left corner. Your computer searches for your mouse.
Double-click Bluetooth 3.0 Mouse.
Note: If your computer has never connected to a Bluetooth device, click Set Up New Device to pair your mouse to your computer.

When pairing is complete, the LED indicator lights for two seconds.

The first time you use your mouse, turn it on by moving the on/off switch on the bottom of the mouse to the on position.
If you don't use your mouse for five minutes, it switches to standby mode to conserve the battery. To wake up your mouse, press any button or move it.

PC:

Mac:

Open System Preferences in the dock.
Click the Bluetooth icon .
Click the - in the left-lower corner.
When it asks Are you sure you want to remove this device?, click Remove to un-pair the mouse.

Mouse:

Move your mouse closer to your computer.
Make sure that your computer meets the system requirements.
Make sure that your mouse is paired by pressing the blue CONNECT button on the bottom of your mouse, then pair it with your computer.
Make sure that the Bluetooth function on your computer or your Bluetooth receiver is working.
Un-pair your mouse from your computer, then re-pair it.
If the LED indicator on your mouse is blinking every five seconds, replace the battery.