Insignia NS-PNM7013-BK Quick Setup Manual

NS-PNM7013_16-0167_QSG_V1.ai 1 3/31/2016 1:28:59 PM NS-PNM7013_16-0167_QSG_V1.ai 1 3/31/2016 1:28:59 PM
QUICK SETUP GUIDE
Wireless Optical
Mouse
NS-PNM7013-BK/NS-PNM7013-BL/NS-PNM7013-RD
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Wireless Optical Mouse
• USB transceiver
• AA battery (1)
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 10, Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®, or Mac OS
10.X or higher
• One available USB port
FEATURES
• Blue sensor for enhanced tracking
Left button
Scrolling Wheel
LED indicator
Right button
INSTALLING THE BATTERY AND REMOVING THE USB
TRANSCEIVER
1 Take the battery cover off.
2 Remove the USB transceiver from package or from battery compartment.
Pull
3 Insert the included AA battery into the battery compartment. Make sure that the +
and - signs match the symbols in the compartment.
4 Replace the battery cover.
Tip: Store the USB transceiver in the mouse when it is not in use.
AA battery
CONNECTING YOUR MOUSE TO YOUR COMPUTER
1 Plug the USB transceiver into a USB port on your computer.
2 Slide the ON/OFF switch on your mouse to ON.
The computer automatically detects the mouse and you can
Connect button
immediately begin using it.
OFF/ON switch
Battery Cover
USB transceiver
If the mouse does not work:
• Move your mouse closer to your computer.
• Re-plug the USB transceiver into the USB port on your computer, then press the
connect button on the mouse. The LED indicator on the mouse flashes steadily while
in pairing mode (10 seconds). After pairing successfully, the LED indicator blinks for
10 seconds, then turns off.
• Check the battery in your mouse. The LED indicator blinks for 10 seconds when the
battery is low.
Final flat size: 15 x 7.5 in (381 x 190.5 mm)
V1
Final fold size: 5 x 7.5 in (127 x 190.5 mm)
FINAL
FOR PRINT