Insignia NS-PWM3R Quick Setup Manual

FOR PRINT
NS-PWM3_R_B_19-0276_QSG_V1_EN.ai 1 6/5/2019 3:37:03 PM NS-PWM3_R_B_19-0276_QSG_V1_EN.ai 1 6/5/2019 3:37:03 PM
QUICK SETUP GUIDE
Wireless Mouse
3-Button
NS-PWM3 / NS-PWM3R /
NS-PWM3B / NS-PWM3-C /
NS-PWM3R-C / NS-PWM3B-C
PACKAGE CONTENTS
• Wireless mouse
• Nano receiver
• AA battery (1)
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 10, Windows® 8.1, Windows® 8, Mac OS 10.X or higher, or
Chrome OS
• One available USB port
Before using your new product, please read these instructions to prevent any damage.
V1
FINAL
Final flat size: 12.375 × 5.83 in. (314.33 × 148.08 mm)
Final fold size: 4.125 × 5.83 in. (104.775 × 148.08 mm)
MOUSE FEATURES
LED indicator
Scrolling wheel
Right button
Left button
INSTALLING THE MOUSE BATTERY AND REMOVING
THE NANO RECEIVER
1 Take the battery cover off.
2 Remove the nano receiver.
Pull
3 Insert the included AA battery into the battery compartment. Make
sure that the + and - signs match the symbols in the compartment.
OFF/ON switch
Battery cover
AA battery
4 Replace the battery cover.
Tip: Store the nano receiver in the mouse when it is not in use.
Nano receiver
CONNECTING YOUR MOUSE TO YOUR COMPUTER
1 Plug the nano receiver into a USB port on your computer.
2 Slide the ON/OFF switch on your mouse to ON.
Your computer automatically detects your mouse and you can
immediately begin using it.
If the mouse does not work:
• Move your mouse closer to your computer.
• Check the battery in your mouse. The LED
indicator blinks for 10 seconds when the
battery is low.
LED indicator